Valves & actuators
O-rings and seal profiles for gate, ball and control valves, plus pneumatic and hydraulic actuators across process trains. Protective boots for exposed actuator rods and valve stems.
OEM PRECISION MANUFACTURER · NOT A RESELLER, NOT A DISTRIBUTOR
Rubber Sealing Components for Oil & Gas, Manufactured in India
FKM, NBR and EPDM sealing components for upstream, petrochemical and desalination service, manufactured to your drawing at our ISO 9001:2015 facility in Nashik, India.
COMPONENTS WE SUPPLY FOR OIL & GAS
Engineered to Spec, Not to Catalogue
We don’t stock generic parts. Each component is produced against your drawing or an OEM sample — compound, hardness and geometry matched to the media and service conditions rather than picked from a catalogue.
O-Rings
Hydraulic, pneumatic and static seals for valve bodies, actuators and pipeline fittings
- AS568, ISO 3601, JIS B2401 and DIN 3771 sizes
- FKM to +250 °C for aggressive media
- Cut-to-print from approved drawings
- Dimensional conformity to ISO 3302-1, class M1 to M4
Oil Seals
Rotary shaft seals for centrifugal and reciprocating pumps, compressors and gearboxes
Gaskets
Flange, cover and manway gaskets to the dimensional standard your drawing calls out
Bellows & Boots
Protective boots for actuator rods, valve stems and exposed linkages
Bushes & Bushings
Pivot and linkage bushes for valve actuators and skid-mounted equipment
Grommets
Cable and conduit transit seals for control panels, junction boxes and enclosures
Sponge & Foam Rubber
Enclosure, hatch and access-panel sealing for skid and cabinet assemblies
Anti-Vibration Mounts
Bonded mounts for pump skids, compressor bases and generator sets
WHERE OUR COMPONENTS ARE USED
Built into the equipment that moves hydrocarbons.
Pumps & compressors
Rotary shaft seals and static gaskets for centrifugal and reciprocating equipment in upstream and downstream duty. Bonded mounts for pump and compressor skids.
Pipeline & flange sealing
Moulded gaskets for flanged joints, produced against the dimensional standard your drawing calls out — ASME B16.21, EN 1514-1 or JIS B2404.
Desalination & water treatment
EPDM and FKM sealing for high-salinity and chemically aggressive process streams, including membrane housing and pressure vessel joints.
BUILT FOR OIL & GAS CONDITIONS
Sealing that holds under pressure and chemistry.
Hydrocarbon service is unforgiving. Compound selection is driven by the media, service temperature and pressure class of your application, not by catalogue availability.
Chemical resistance
FKM compounds resist petroleum oils, fuels and many solvents at sustained temperature — the default for aggressive process media. NBR where contact is moderate-temperature oil.
Temperature range
Compounds selected across the full service envelope: FKM to +250 °C, silicone from −60 °C, EPDM from −40 °C — sub-zero ambient through to sustained high-temperature process duty.
Pressure cycling
Geometry and hardness chosen for repeated pressure cycling rather than static sealing alone. Back-up rings specified where extrusion gap and pressure require them.
Contamination tolerance
Sealed geometries maintain integrity in particulate-laden, wet and corrosive atmospheres typical of process plant.
CUSTOM ENGINEERING
We match your equipment spec, not the other way around.
Margo operates dedicated tooling capability for custom rubber components. Send us your OEM drawing, an existing part, or the equipment make and model — we reverse-engineer and produce to your specification.
- OEM drawing and sample matching
- Custom mould tooling in-house
- Compound selection by application
- Pre-production sample approval process
- Long-run production with consistent batch quality
Nashik, Maharashtra, India
ISO 9001:2015 certified manufacturing facility
QUALITY & CERTIFICATION
Every batch. Every shipment.
Margo Rubber Products holds ISO 9001:2015 certification, certificate 09111526A, issued by Integral Certification Ltd and valid to 21 February 2027. Our quality management system covers incoming raw material inspection, in-process control and outgoing batch documentation.
ISO 9001:2015
Certified quality management covering all production and inspection processes. Certificate 09111526A, Integral Certification Ltd. Documentation available on request.
OEM compliance
Every component produced against a controlled drawing revision. No substitutions without approval.
Batch traceability
Raw material certificates and batch records retained per shipment. Available to oil & gas buyers on request.
EXPORTING TO THE GULF
Direct supply from Nashik to UAE and Saudi Arabian buyers.
Margo Rubber Products exports precision sealing components directly to buyers in the United Arab Emirates and the Kingdom of Saudi Arabia. We manage international documentation including commercial invoices, packing lists and certificates of origin.
Nhava Sheva to Jebel Ali is one of the shortest and most frequent lanes out of India, typically five to nine days port to port, with both LCL and FCL options. Buyers retain full control of their preferred logistics arrangements.
- Export documentation
- Commercial invoice, packing list, certificate of origin
- Freight routing
- Sea and air freight via established forwarders, ex-works Nashik
- Communication
- English-language correspondence and technical support
- Payment terms
- Discussed per order — TT and LC accepted
India → Gulf
Direct OEM supply chain from Nashik, Maharashtra
- United Arab Emirates
- Saudi Arabia
- Oman
- Qatar
- Kuwait
Buyers are responsible for confirming import duties and conformity requirements for their specific order. Saudi consignments clear through the SABER platform, which requires a product certificate of conformity and a shipment certificate of conformity against the correct HS code for every consignment; UAE consignments clear under the Emirates conformity scheme. We supply the technical file, material certificates and origin documentation your conformity body will ask for. Contact us for documentation support.
FREQUENTLY ASKED QUESTIONS
Questions from Gulf buyers.
GET STARTED
Ready to specify sealing components from the Nashik plant?
Send the drawing, an existing part, or the equipment make and model — with the media, the service temperature and the pressure class. Our engineering team responds within 48 hours with a compound and hardness recommendation, dimensional confirmation and a quotation, and an indicative Jebel Ali transit for your consignment.
Margo manufactures FKM (Viton) O-rings and seals rated for -20°C to 200°C continuous service, suited to oil & gas, petrochemical, and desalination sealing per ISO 9001:2015 quality systems. For NORSOK M-710 or API 6A critical subsea applications, contact us to discuss compound-specific certification, this is a roadmap item, not yet certified.