Margo Rubber Products is an ISO 9001:2015 certified manufacturer of moulded and extruded rubber components in Nashik, Maharashtra. Compound formulation, mould tooling, moulding, finishing and testing all happen under one roof, for 24 named accounts across seven sectors.
>99%
ON-TIME DELIVERY
Margo Rubber Products was founded in Nashik in 2005. The previous works ran 6,000 sq ft and about 200,000 parts a month. Moving to a purpose-built 10,000+ sq ft plant, and automating during the move, took installed capacity to five million parts a month — twenty-five times the old works.
The plant is built for a single linear workflow: raw material in at one end, finished goods out at the other, with no cross-traffic between clean and flash-generating areas. Today it supplies 24 named accounts across automotive, industrial machinery, electrical, specialist vehicles, medical, chemicals and tooling.
OUR VISION
We have screened 95 countries, written country-level sourcing playbooks for 18 of them, and set an activation order of five: Australia, the United Kingdom, the UAE, Saudi Arabia and Malaysia. The research is done. The work now is filling the lanes.
OUR MISSION
We mix our own compound. If the part sits in hot oil we build for hot oil; if it sits in sunlight under static strain we build for ozone. The formulation is the engineering, and it is the one thing we will not subcontract.
Eight compounds mixed in-house · tooling cut in-house
Six commitments, each with a number behind it that we will show you on an audit.
First article, in-process and final release inspection on every despatch lot. Target rejection rate under 1%.
Dimensional conformity to ISO 3302-1, classes M1–M4 moulded and E1–E3 extruded. Tolerance follows the section.
We quote against ASTM D2000 / SAE J200, ASTM D1056, ISO 3601 / AS568 and IS 5382.
Eight polymer families mixed in-house. Even filler distribution, batch after batch, since mixing was automated.
Our engineers work directly with your R&D on design validation. Audits welcomed, not negotiated around.
Over 99% on-time delivery, 95% repeat order rate, and an average client relationship over ten years.
“A large share of our work arrives as a worn part in an envelope, not a CAD file. Somebody needs that part to exist again, and it has to fit.”
Reverse engineering is a standard route to a first order here. We measure the part, identify the compound family, and quote against the sample. It is also the clearest test of whether a supplier actually formulates compound or simply buys it in.
A 10,000+ sq ft plant in the Nashik industrial belt, laid out for a single linear workflow with compression, transfer and injection moulding plus continuous-cure extrusion. Automated presses hold cure temperature and pressure closed-loop, which takes operator variation out of the part.
PRODUCT PORTFOLIO
On the floor
Margo is run by the two people who started it. Neither sits between you and the plant.
Mehboob Shaikh
Founder & Director
Twenty years in rubber compounding. Leads formulation, product development and quality — the three things that decide whether a part works.
Ayyaz Shaikh
Co-Founder & Business Development Head
Nine years leading customer relations and vendor development. Runs quotation, programme onboarding and the export desk.
We screened and scored 95 countries across seven regions, wrote country-level sourcing playbooks for 18, and set an activation order of five. Each playbook carries duty treatment, certificate requirements, transit time and destination port — not a flag on a map.
95
Markets Screened and Scored
18
Country Playbooks Written
ISO 9001:2015
[Approved]Quality Management System
Integral Certification Ltd · Certificate 09111526A · valid to 21 February 2027
IATF 16949:2016
[Upgrade in progress]Automotive Quality
Target end 2026
NORSOK M-710 / API
[Qualification in progress]Oil & Gas Elastomer Qualification
Target 2027
ISO 14001:2015
[Upgrade in progress]Environmental Management
Target 2027
ISO 45001:2018
[Upgrade in progress]Occupational Health & Safety
Target 2027
Scope: rubber moulded components — quality management, not a product approval. Read the certificate ›
CERTIFIED BY
Automating compound mixing and cure control cut scrap: material utilisation improved 20% and cycle time fell 30%, which is less rubber and less energy for the same part. The plant is fully compliant with MIDC environmental and industrial norms. We have not set a carbon target and will not publish one until we can measure against it.
Better material utilisation since automation
20%
Less production time per cycle
30%
Post-automation
Feasibility report included
AEM to natural rubber
10+ year average relationship
REFERENCES
We will name contacts at our customers during a vendor audit or qualification, on request. Volumes and part numbers are commercially confidential and disclosed under NDA.
Margo Rubber Products established in Nashik as a compression-moulding workshop.
TWENTY-FOUR NAMED ACCOUNTS ACROSS SEVEN SECTORS
Trade marks shown are the property of their respective owners and appear solely to identify commercial supply relationships.
Our engineering team replies within one business day. A full quotation and feasibility report follows inside 48 hours, with a compound recommendation and a lead time.
